10G SFP+ ER Transceiver 40km 1270nm-1610nm RoHS Compliant

15dB Power-budget CWDM DFB + PIN 10G SFP+ 1270~1610nm Fiber Transceiver Module 40km LC DOM

Products Description of 10G SFP+ CWDM-ER 40km (1270~1610)nm Series

This CWDM SFP+ ER Transceiver provides high capacity, high bandwidth communication solutions for multiplexed optical networks. It it designed for 10 Gigabit Ethernet links up to 40km over standard single mode fiber with an LC duplex connector.

The transceiver consists of two sections: The transmitter section incorporates a DFB laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements.

18 center wavelengths are available from 1270nm to 1610nm with each step 20nm.

The SFP+ Module is compliant with SFF-8431, SFF-8432, CE, RoHS, FCC and IEEE 802.3ae 10GBASE-ER and 10G Fibre Channel.

The module is with the SFP 20-pin connector to allow hot plug capability. The single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal to the receiver.

Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

Each optical transceivers are tested the reliability, interoperability and compatibility before shipping.

Features

• Hot-pluggable SFP+ footprint
• Build-in Digital Diagnostics Monitoring (DDM) through Serial Interface compliant with SFF-8472
• Supports 9.95 to 10.5 Gb/s bit rates
• Compliant with SFP+ MSA standard SFF-8431
• Compliant with 802.3ae 10GBASE-ER
• Duplex LC receptacle
• Commercial temperature range 0°C to 70°C
• Single 3.3V power supply
• Power dissipation < 1.5 W
• 18-Wavelength CWDM DFB transmitter from 1270nm to 1610nm, with step 20nm
• Maximum link length of 40km on SMF
• Uncooled CWDM DFB laser, PIN photodiode
• RoHS compliant and lead free
• Class 1 Laser International Safety Standard IEC-60825 Compliant

Application

• 10G Fiber Channel
• 10GE Data Center Switches and Routers
• 10GBASE-ER/10GBASE-EW CWDM Ethernet
• 10GE Network interface cards and Fiber Media Converters

Functional Specification

Notice: When the long reach transceiver is used in short distance transmission, please match with appropriate attenuator according to the table.

Ordering Information

10G SFP+ CWDM-ER 40km (1270~1610)nm Series

Compatibility

All Gigaopto’s transceivers are standards-based and MSA (Multi-Source Agreement) compliant, and rigorously tested and coded in our own facilities to ensure the highest level of performance. We conduct 100% application testing under end-use conditions.

For this 10G SFP+ CWDM ER 40km Transceiver, please refer to the P/N correspondence table ( for example in 1550nm Wavelength channel). For more product compatibility, please feel free to contact us.