|Place of Origin:||CN|
|Certification:||RoHS / CE / FCC|
|Minimum Order Quantity:||1 PCS|
|Packaging Details:||10pcs per box|
|Delivery Time:||3-5 work days|
|Payment Terms:||L/C, T/T|
10GBASE-ZR/ZW 10G Ethernet
80KM 10G Fiber Channel
SONET OC-192 &SDH STM 64
TRANSCOM’s TS-XF-1510-80D Small Form Factor 10G (XFP) transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification. They comply with 10-Gigabit Ethernet 10GBASE-ZR/ZW per IEEE 802.3ae and 10G Fiber Channel 80KM. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The transceivers are RoHS compliant and lead free per Directive 2002/95/EC3.
Absolute Maximum Ratings
|Maximum Supply Voltage 1||Vcc3||-0.5||4.0||V|
|Maximum Supply Voltage 2||Vcc5||-0.5||6.0||V|
|Case Operating Temperature||Tcase||-5||70||°C|
|Bit Error Ratio||BER||10-12||2|
|Max. Supported Link Length||LMAX||80||km||1|
Tested with 10.3Gbps, 231 – 1 PRBS
Digital Diagnostic Functions
As defined by the XFP MSA1, TRANSCOM XFP transceivers provide digital diagnostic functions via a 2-wire serial interface, which allows real-time access to the following operating parameters:
It also provides a sophisticated system of alarm and warning flags, which may be used to alert end-users when particular operating parameters are outside of a factory-set normal range.
The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through the 2-wire serial interface. When the serial protocol is activated, the serial clock signal (SCL pin) is generated by the host. The positive edge clocks data into the XFP transceiver into those segments of its memory map that are not write-protected. The negative edge clocks data from the XFP transceiver. The serial data signal (SDA pin) is bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially. The 2-wire serial interface provides sequential or random access to the 8 bit parameters, addressed from 000h to the maximum address of the memory.
For more detailed information including memory map definitions, please see the XFP MSA Specification.