Home ProductsXFP Optical Transceiver

10 Gigabit Ethernet Fibre Channel Module , 10g XFP Transceiver 40km Distance

10 Gigabit Ethernet Fibre Channel Module , 10g XFP Transceiver 40km Distance

10 Gigabit Ethernet Fibre Channel Module , 10g XFP Transceiver 40km Distance

Product Details:

Place of Origin: CN
Brand Name: Transcom
Certification: RoHS / CE / FCC
Model Number: TS-XF-1510-40D

Payment & Shipping Terms:

Minimum Order Quantity: 1 pcs
Packaging Details: 10pcs per box
Delivery Time: 3-5 work days
Payment Terms: L/C, T/T
Contact Now
Detailed Product Description
Distance: 40KM Temperature: -5°C To 70°C
Power Dissipation: <3.5W Wavelength: 1550nm
Connector: LC

APPLICATIONS

10GBASE-ER/EW 10G Ethernet

40KM 10G Fiber Channel

SONET OC-192 &SDH STM 64

 

 

PRODUCT DESCRIPTION

TRANSCOM’s TS-XF-1510-40D Small Form Factor 10 G (XFP) transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification. They comply with 10-Gigabit Ethernet 10GBASE-ER/EW per IEEE 802.3ae and 10G Fiber Channel 40KM. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant and leads free per Directive 2002/95/EC3.

 

. Absolute Maximum Ratings

Parameter Symbol Min Typ Max Unit Ref.
Maximum Supply Voltage 1 Vcc3 -0.5   4.0 V  
Maximum Supply Voltage 2 Vcc5 -0.5   6.0 V  
Storage Temperature TS -40   85 °C  
Case Operating Temperature Tcase -5   70 °C  

 

. Electrical Characteristics (TOP = -5 to 70, VCC3 = 3.13 to 3.45 Volts)

Parameter Symbol Min Typ Max Unit Ref.
Main Supply Voltage Vcc5 4.75   5.25 V  
Supply Voltage #2 Vcc3 3.13   3.45 V  
Supply Current – Vcc5 supply Icc5     320 mA  
Supply Current – Vcc3 supply Icc3     380 mA  
Module total power P     3.5 W 1
Transmitter          
Input differential impedance Rin   100   Ω 2
Differential data input swing Vin,pp 120   820 mV  
Transmit Disable Voltage VD 2.0   Vcc V 3
Transmit Enable Voltage VEN GND   GND+ 0.8 V  
Transmit Disable Assert Time       10 us  
Receiver          
Differential data output swing Vout,pp 340 650 850 mV 4
Data output rise time tr     38 ps 5
Data output fall time tf     38 ps 5
LOS Fault VLOS fault Vcc – 0.5   VccHOST V 6
LOS Normal VLOS norm GND   GND+0.5 V 6
Power Supply Rejection PSR   See Note 6 below   7

Notes:

1. Notes: Maximum total power value is specified across the full temperature and voltage range.

2. After internal AC coupling.

3. Or open circuit.

4. Into 100 ohms differential termination.

5. These are unfiltered 20-80% values

6. Loss Of Signal is open collector to be pulled up with a 4.7k – 10kohm resistor to 3.15 – 3.6V. Logic 0 indicates normal operation; logic 1 indicates no signal detected.

7. Per Section 2.7.1. in the XFP MSA Specification1.

 

. Optical Characteristics (TOP = -5 to 70, VCC3 = 3.13 to 3.45 Volts)

Parameter Symbol Min Typ Max Unit Ref.
Transmitter
Average Optical Power Pf -1   4 dBm  
Optical Wavelength λ 1530   1570 nm  
Sidemode Suppression ratio SSRmin 30     dB  
Optical Extinction Ratio ER 8.2     dB  
Tx Jitter Generation(peak-to-peak) Txj1 - - 0.3 UI  
Tx Jitter Generation(RMS) Txj2 - - 0.1 UI  
Transmitter and Dispersion Penalty TDP     2 dB  
Average Launch power of OFF transmitter POFF     -30 dBm  
Relative Intensity Noise RIN     -130 dB/Hz  
Receiver
Receiver Sensitivity RSENS1     -16.5 dBm 1
Input Saturation Power (Overload) Psat +0.5     dBm  
Wavelength Range λC 1270   1610 nm  
Receiver Reflectance Rrx     -27 dB  
LOS De-Assert LOSD     -18 dBm  
LOS Assert LOSA -32     dBm  
LOS Hysteresis   0.5     dB  

Notes:

Measured with worst ER; BER<10-12@10.3Gbps,231 – 1 PRBS.

Contact Details
Shenzhen Transcom Technology Limited

Contact Person: Iris

Tel: +8618924996170

Send your inquiry directly to us (0 / 3000)