Home ProductsEthernet Media Converter

Dual Fiber Ethernet Media Converter 2 RJ45 Ports Fiber Optic Media Converter

Dual Fiber Ethernet Media Converter 2 RJ45 Ports Fiber Optic Media Converter

Dual Fiber Ethernet Media Converter 2 RJ45 Ports Fiber Optic Media Converter

Product Details:

Place of Origin: Guangdong, China
Brand Name: Transcom / OEM
Certification: ISO FCC CE RoSH
Model Number: TS-100-SD-12-20

Payment & Shipping Terms:

Minimum Order Quantity: 1 pcs
Price: Negotiation
Packaging Details: Standard package
Delivery Time: 3-5 working days
Contact Now
Detailed Product Description
Model Number: TS-100-SD-12-20 Speed: 10/100M
Ethernet Port: 2 RJ45 Ports Connector Type: SC
Distance: 20km Fiber: Dual Fiber

10/100M Dual Fiber Single mode optic Media Converter with 2 RJ45 ports/2 ports fiber optic media converter/media convert​

 

Features:

1. Support Tag-VLAN,Port-VLAN

2. Support 10/100Base TX to 100Base FX,can be connected to relational networking equipments .;

3. With 128Kb RAM;

4. Support Automatic Switch between parallel lines and crossed lines .

5. With LED Lamps function .(link/activity, 10/100M,power)

6. Support select working-mode via Hyper terminal .

7. The transmission distance can up to 120Km.

 

Ethernet Standards:

Comply with:

IEEE802.3

IEEE802.3u

 

Tables for panels and LED function:

LED Lamps Functions Status Description
PWR Power LED on Power is on and normal
off Power is fail
FX-SD Fiber port link/action status LED on Fiber signals is detected
off No fiber signals
FX-LINK/ACT Fiber port link/action status LED on Fiber link is in correct connection
Blink Data packet goes through FX end
off Fiber link is fail
TX-SPD (Left one) UTP port speed LED on 100M speed
off 10M speed

 

TX-LINK/ACT (Right one)

UTP port link/action status LED on The UTP link is in correct connection
Blink Data packet goes through TX end
off The UTP link is fail

 

Seting in PC for converter :

1.Set the HyperTerminal in Windows system

2.Connect the RS232 interface port of converter to the COM1 or COM2 port of the PC ;

3. Value seting :

1). Bits per second: 9600 ;

2). Data bits: 8 ;

3). Parity: None ;

4). Stop bits: 1 ;

5). Flow control: None ;

4. Select "Wrap lines that exceed terminal width" in the “ASCII” dialog-box.

 

After your finishing the above 4 seting steps ,then turn on the power of converter ,the HyperTerminal will show you the contect listed below:

1. Please select menu: [T] - Tag VLAN; [P] - Port VLAN; [R] - Read Register; [Other keys] - Quit.

2. Tag VLAN Set: [Y] - Yes; [N] - No; [Other keys] – Quit;

3. Tag Set: Please enter Port1 VLAN tag value;

4. Set Port1 VLAN Tag;

5. Please enter Port2 VLAN tag value;

6. Set Port2 VLAN Tag;

7. Please select VID index(0 - 7):

8. Port VLAN Set: Port VLAN enable? [Y] - Yes; [N] - No; [Other keys] – Quit;

9. Continue set? [Y] - Yes; [N] - No.

10. Note: If you exit, at next setting you must reset media converter.

 

After doing all the above seting ,if the converter doesn’t work ,then you need to re-turn on the converter.If you do not visit the converter via the HyperTerminal within 20 minutes,then the converter will work at power-saved mode,You can reset the converter by re-turnning on it .

Contact Details
Shenzhen Transcom Technology Limited

Contact Person: Nicole Chen

Tel: +8613662576983

Send your inquiry directly to us (0 / 3000)